Lift sling rigging company produce Full-Body Safety Harnesses for Fall Protection,Fall arrest and Restraint Full body harness,Fire-Resistan Full-Body Safety Harnesses,Flame-Resistant Full-Body Safety Harnesses,aramid Full-Body Safety Harnesses,Kevlar Full-Body Safety Harnesses,high temperature resistance Full-Body Safety Harnesses,Welding Full Body Harness,Fire Free 4 Point Flame Resistant Body Harness.
Full Body Safety Harnesses for Fall Protection
A full body safety harness is the core of any personal fall arrest system. The Lifute range of pêlên ewlehiyê yên laşê tevahî ji bo parastina hilweşînê is built for people who work at height — steel structure erection, scaffolding, roofing, tower and utility maintenance, dock and warehouse operations. Every harness uses a five-point configuration that spreads fall-arrest forces across the shoulders, chest, pelvis and thighs instead of concentrating them on the waist, and every load-bearing junction is sewn with bar-tack reinforced stitching. The primary attachment is a forged steel dorsal D-ring; a buffer pack, positioning belt and shock-absorbing lanyard can be added to match your task.
- 5-point full body design — shoulder, chest, thigh and sub-pelvic straps keep the body upright and distribute arrest force over a wide area.
- Forged steel dorsal D-ring — the standard rear fall-arrest attachment point, set into a reinforced webbing pad.
- Tîpa polesterê ya bi hêza bilind - 45 mm / 48 mm woven webbing, resistant to abrasion, UV and most industrial oils.
- Bar-tack reinforced stitching — high-tenacity polyester thread with multi-pass reinforcement at every stress point.
- Full adjustability — pass-through and quick-release buckles let one size fit a wide range of body shapes.
- Configurable system — add a shock-absorbing lanyard, positioning belt, scaffold hook or tool loops.
- OEM / ODM amade ye — custom webbing colour, etîketên pêçandî, logo printing and private-label packaging.
- Factory direct — manufactured in Jiangsu, China with export packing and bulk lead times.

Why Choose a Full Body Safety Harness Instead of a Waist Belt
A waist belt or single back strap is a restraint device: it stops a worker reaching an edge, but it is not designed to catch a fall. Under a fall load, a waist-only belt applies the whole arrest force to the abdomen, which is why most modern fall protection regulations require a full body harness for fall arrest. The five-point full body harness spreads that load across the strongest parts of the body and keeps the wearer in an upright, head-up posture after the arrest, which matters when a rescue has to follow.
| Taybetî | 5-Point Full Body Harness | Waist Belt / Half-Body Belt |
|---|---|---|
| Primary use | Fall arrest and fall restraint | Fall restraint, positioning, tool carrying |
| Load distribution | Shoulders, chest, pelvis, thighs | Waist only |
| Post-arrest posture | Body held upright, head up | Risks torso hyperextension |
| Xalên girêdanê | D-ring Dorsal (rêzan), front and side points optional | Rear D-ring or strap |
| Ji bo çêtirîn | Work at height where a fall is possible | Edge restraint and positioning only |
Always select the harness type required by the fall protection regulations that apply to your site and market.
Product Specifications of the Full Body Safety Harness
The table below lists the standard specification of our five-point full body safety harness. Most parameters can be changed for OEM orders — webbing width and colour, type buckle, helwesta D-ring, label content and packaging are all configurable.
| Parametre | Specification |
|---|---|
| Navê hilberê | Full body safety harness (5-point fall arrest harness) |
| Cins | LF-FBH-5P01 (Kodên modela xwerû ji bo fermanên OEM hene) |
| Awa | Bedena tevahî, pênc xalî, girtina payîzê; pozîsyon û xalên pêvekirina pêş vebijarkî |
| Materyalên tevnvîsê | High-strength polyester (PES) tevnkirin, colour-fast and abrasion resistant |
| Firehiya tevniyê | 45 mm / 48 mm standard; 43 mm available on request |
| Hêza şikestina tevniyê | ≥ 22 kN (45 mm tevna polester) |
| Xalên girêdanê | 1 × zengila D-dorsalê ya pola qelandî (rêzan); front chest D-ring and side D-rings optional |
| D-ring dimensions | Pola qelandî, approx. 50 mm inner width; qedandina elektroforetîkî ya zinckirî an reş |
| Hardware | Pola qelandî / alloy adjusters; pass-through buckles or quick-release buckles |
| Stitching | High-tenacity polyester thread, bar-tack reinforced at all load-bearing junctions |
| Sizes | Gişt (lêtê), M–L, XL–XXL |
| Rêjeya giraniya bikarhêner | 60-100 kg standard; guhertoya giran a 100-140 kg heye |
| Vebijarkên rengîn | Zer (rêzan), porteqalî, şîn, reş, gewr; rengên xwerû li ser daxwazê |
| Giraniya yekîneyê | Approx. 0.9-1,2 kg li gorî mezinahî û veavakirinê |
| Germahiya xebatê | −30 °C to +50 °C |
| Standardên referansê | LI 361 / ANSI Z359.11 / GB 6095 — test reports and certificates can be supplied on request |
| Vêra | Shock-absorbing lanyard, çengelê îskeleyê, positioning belt, pêlên amûran, çenteyê hilanînê |
| Packaging | 1 pc per polîbag, paşê carton hinardekirin; ambalaja xwerû ya firotanê heye |
| MOQ | Ji 200 pcs per mezinahî û reng; mîqdara doza-siparîşa kêmtir muzakere |
| OEM / ODM | Rengê Custom, labelê tevdanî, çapkirina logoyê, kaxeza talîmatê ya çapkirî, label taybet |
| Cihê jêderê | Jiangsu, çîn |
Structure and Key Components
Every component of the harness is selected for one purpose: keeping the wearer attached to the anchorage and upright after an arrest. The dorsal D-ring carries the fall-arrest load, the shoulder straps transfer that load over the torso, and the sub-pelvic strap prevents the wearer from sliding out of the harness in a head-down position.

- D-ring Dorsal - xala pêvekirina paşîn a pola ya çalkirî ji bo lingê girtina payizê an jî xeta jiyanê ya xwe-vekêşan.
- Kemberên milan - pêş û paş vesazkirî, distributing arrest force across the upper torso.
- Kembera sîngê — keeps the shoulder straps in place and prevents them slipping off during a fall.
- Sub-pelvic (seat) strap - Piştgiriya pelvisê dike ji ber vê yekê laş li şûna ku serê xwe berjêr bike rast bimîne.
- Kemberên ran - bi tevahî verastkirin, with padding optional for long shifts.
- Adjusters û buckles — pass-through friction buckles or quick-release buckles for fast donning.
- Traceability label — printed with the model, hejmara komê, production date and inspection record.
Standard Configuration and Optional Accessories
The harness can be supplied on its own or as a complete fall arrest kit. Tell us the task and the anchorage available, and we will quote the matching configuration.

| Perçe | Dibe | Serîlêdana tîpîk |
|---|---|---|
| Harness | 5-point standard / 5-point with positioning belt / 3-point economy | Fall girtina, positioning, tengî |
| Lanyard | Shock-absorbing lanyard 1.8 m with scaffold hook; or double-leg 100% tie-off lanyard | General construction, steel erection, tower work |
| Connector | Screw-lock karabiner or scaffold hook, 22–55 mm gate opening | Matching the anchorage point |
| Padding | Shoulder and thigh pads | Suspension work and long shifts |
| Tool loops | Webbing loops or metal D-rings for tool tethering | Maintenance and assembly work |
| Embarkirinî | Drawstring bag or hard-shell carry case | Neqilkirin, inspection and storage |
Applications of Full Body Safety Harnesses
These harnesses are supplied to construction contractors, steel fabricators, utility and telecom maintenance teams, shipyards, ports and warehouse operators, and to safety-equipment distributors who resell under their own brand.

- Steel structure erection and welding at height
- Scaffolding assembly and dismantling
- Roofing, waterproofing and façade work
- Tower, mast and antenna maintenance
- Power line and utility pole work
- Dock, port and warehouse racking operations
- Bridge, tunnel and wind-power maintenance
How to Choose the Right Full Body Safety Harness
- Match the harness to the task. Fall arrest needs a rear dorsal D-ring; positioning work needs a waist or side D-ring as well; restraint work can use a simpler configuration.
- Check the standard required in your market. Buyers in the EU normally specify EN 361, in North America ANSI Z359.11, in China GB 6095. Tell us the destination market and we will confirm the matching version.
- Confirm user weight and size. Standard harnesses suit users of 60–100 kg; heavy-duty versions cover 100–140 kg. Larger sizes are available for winter clothing or bulky workwear.
- Choose the webbing. Polyester is the default for general construction; specify aramid or other high-temperature webbing where welding spatter or heat is a factor.
- Plan the complete system. A harness only works with an anchorage, a connector and a lanyard. Ordering the whole kit avoids mismatched components on site.
- Consider branding and packaging. For distribution, add your logo, colour scheme, woven labels and retail packaging at the OEM stage rather than after the goods are produced.
Quality Control and Traceability
Production runs through documented checkpoints: incoming inspection of webbing, têl û hardware; in-line inspection of stitching density and bar-tack reinforcement; Vekolîna qediyayî ya fonksiyona buckle, Ewlekariya D-ring û dirêjahiya strap; û testek hêza statîk li ser yekîneyên nimûne. Each harness carries a traceability label linking it to its production batch, so inspection and replacement records can be kept throughout its service life.
Recommended service life is up to five years from first use, provided the harness passes the pre-use inspection required by your site procedure. Any harness involved in a fall arrest must be withdrawn from service and inspected or replaced.
Why Buy Full Body Safety Harnesses From Lifute
Lift Sling Rigging Co., Ltd. has been manufacturing lifting, li Taizhou alavên hilgirtin û ewlehiyê, Parêzgeha Jiangsu nêzî sî sal in. That experience shows in the details buyers ask about most: consistent webbing quality between batches, dirûtina ku taybetmendiya xwe digire, hardware ku di navbera fermanan de nayê guheztin, and packaging that survives export handling.
- Fabrîk-rasterast bihayê on both trial and bulk orders.
- Piştgiriya OEM û ODM - reng, labels, logo and packaging produced to your artwork.
- Ezmûna Export - karton, etîket û belgeyên barkirinê ji bo kirrûbirên navneteweyî hatine amadekirin.
- Related safety products from the same factory, so harnesses, lanyards and safety nets ship together.
Pirsên Pir Pir Dipirsin
What is a full body safety harness used for?
A full body safety harness is personal protective equipment used to arrest a fall when someone works at height. The wearer connects the dorsal D-ring to an anchorage point through a lanyard or self-retracting lifeline, so that if a fall occurs the harness catches the body and spreads the arrest force across the shoulders, chest, pelvis and thighs.
What is the difference between a full body harness and a half-body safety belt?
A full body harness has five load-bearing points — shoulders, chest, sub-pelvic strap and thighs — and is designed to arrest a fall. A half-body or waist belt only wraps the waist and is intended for restraint or positioning, not for catching a fall. For any task where a fall is possible, use a full body harness.
How do I choose the correct harness size?
Size is determined by body weight and by the adjustability range of the straps. Our universal size covers most users between 60 û 100 kg; M–L and XL–XXL versions are available, as is a heavy-duty version rated for 100–140 kg. If workers wear heavy winter clothing, step up one size. Send us your size breakdown and we will match it to production sizes.
Can the harness be used with a shock-absorbing lanyard?
Erê. The harness is normally supplied with a 1.8 m shock-absorbing lanyard with a scaffold hook, or with a double-leg 100% tie-off lanyard for moving between anchorages. The lanyard connector must match the anchorage — tell us the anchorage type (scaffold tube, qelas, anchor ring) when ordering.
Which standard should the harness meet?
It depends on the destination market: LI 361 for the European Union, ANSI Z359.11 for North America, GB 6095 for China, and equivalent national standards elsewhere. Tell us where the goods will be sold and we will confirm the applicable version and the documentation that can accompany the shipment.
Can you print our logo or produce our own colour?
Erê. Rengê tevnê, etîketên pêçandî, logo çapkirî, instruction sheet and retail packaging can all be produced to your artwork as part of an OEM order. Send your vector logo and colour reference (Pantone an RAL) with your enquiry and we will confirm a sample before mass production.
MOQ û dema radestkirinê çi ye?
Standard MOQ ji dest pê dike 200 pcs per mezinahî û reng, and lower quantities can be discussed for a first trial order. Production time depends on quantity, configuration and whether OEM printing is involved; confirm your target quantity and destination port and we will quote a schedule with the price.
How should a full body safety harness be inspected and stored?
Inspect the harness before every use: check the webbing for cuts, fraying, burns and chemical damage, check that stitching is intact, and check that the D-ring and buckles are free of cracks, corrosion and deformation. Store it clean and dry, away from sunlight, heat and chemicals, in the supplied bag. Any harness that has arrested a fall must be withdrawn from service.
Request a Quote for Full Body Safety Harnesses
Send us your size breakdown, colour requirement, target quantity and destination port, û em ê bi bihayê bersivê bidin, hûrguliyên pakkirinê û nexşeyek hilberînê. Nimûneyên OEM dikarin berî hilberîna girseyî werin rêz kirin.
Lift Sling Rigging Co., Ltd. (Wê gulebaran bikin)
Lift Sling Rigging Co., Ltd., Parka Pîşesazî ya Lifute, Bajarê Taizhou, parêzgeha Jiangsu, çîn
Tel / WhatsApp: 18066002268 | E-mail: 702461526@qq.com

